-
Q What is the normal water pressure of the faucet？
A The most comfortable water pressure:0.3-0.5MPa .
-
Q What is the distance between the installation holes of the exposed shower faucet?
A the distance of installation aperture is 12-18cm.
-
Q What is the water flow requirements of the faucet?
A 1)Under the water pressure of 0.3 M Pa ± 0.0 2 M Pa, the flow rate of the bathtub faucet (without accessories) is not less than 0.3 3L/s, and the flow rate of other faucets (without accessories) such as the basin and washing faucets are not less than 0.20 L/s
2)Basin, washing and kitchen faucets (with accessories) flow under the water pressure of 0.1 MPa ± 0.01 MPa,the volume is not more than 0.15 L/s
-
Q Is the sensor faucet can only be used in cold water?
A No ,we have mixer sensor faucet for cold and hot water, the latter can adjust the temperature of the water.
-
Q Possible causes of leaking faucets
A The faucet is still leaking although the valve is closed.
1) the valve core is loose due to the loose cover cap.
Solution： to remove the handle and cover cap, and tighten the cover cap again.
2) the rubber ring at the bottom of the valve is deformed and cannot seal the water.
Solution： to take the valve out, check the bottom rubber ring, reset it and reinstall .
3) Water leaks from the middle of the valve.
Solution： the valve is damaged, need to replace the valve .
4) Water leakage at the bottom of the faucet caused by the O-ring of the water inlet pipe is not properly installed or deformed.
Solution： to unscrew the hose. If the O-ring is not deformed, re-install the O-ring and the water inlet pipe; if the O-ring is found to be deformed, replace the O-ring.
-
Q What is the function of the deck plate?
A The basin in your house has additional 2 or 3 holes, but if you want to install a single-hole faucet, you can use the deck plate to cover the extra two holes.
English